-- *****************************************************************
-- CISCO-TCPOFFLOAD-MIB.my: Cisco CIP TCP OFFLOAD MIB file
--
-- April 1994, Mike Otto
--
-- Copyright (c) 1994-1996, 1998 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
--CISCO-TCPOFFLOAD-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,IpAddressFROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
DisplayString,RowStatus,TruthValueFROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI
cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex
FROM CISCO-CHANNEL-MIB;ciscoTcpOffloadMIB MODULE-IDENTITYLAST-UPDATED"9503300000Z"ORGANIZATION"cisco IBM engineering Working Group"CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"DESCRIPTION"This is the MIB module for objects used to manage
the cisco tcp offload feature.
The IBM mainframe (host) supports TCP/IP. As a way to
save cycles on the host, the TCP/IP stack can be run
on the 3172. This offloads the host from the protocol
processing and is known as TCP-OFFLOAD. This mib
identifies the manageable objects for the TCP-OFFLOAD
feature in the Cisco router."REVISION"9801060000Z"DESCRIPTION"With the addition of Cisco's new Channel Port
Adapter cards, all the references to CIP in the
MIB description and object descriptions are changed
to CMCC (Cisco Mainframe Channel Connection). The
object names in the form of cip... or cipCard...
will remain the same, but will be valid objects
for the Channel Port Adapter cards."REVISION"9504270000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 31}tcpOffloadObjects OBJECTIDENTIFIER::={ ciscoTcpOffloadMIB 1}cipCardOffloadConfig OBJECTIDENTIFIER::={tcpOffloadObjects 1}cipCardOffloadConfigTable
OBJECT-TYPESYNTAXSEQUENCEOF CipCardOffloadConfigEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains configuration information for
the TCP offload feature on the CMCC card.
Changing these parameters will take effect immediately.
The management station can create an entry in this table
by setting the appropriate value in cipCardOffloadConfigRowStatus.
All the objects in this table must be supplied for a successful
create/set.
"::={cipCardOffloadConfig 1}cipCardOffloadConfigEntry
OBJECT-TYPESYNTAX CipCardOffloadConfigEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A list of OFFLOAD configuration values."INDEX{ cipCardEntryIndex,
cipCardDtrBrdIndex,
cipCardSubChannelIndex
}::={ cipCardOffloadConfigTable 1}
CipCardOffloadConfigEntry ::=SEQUENCE{
cipCardOffloadConfigPath OCTETSTRING(SIZE(2)),
cipCardOffloadConfigDevice OCTETSTRING(SIZE(2)),
cipCardOffloadConfigIpAddr IpAddress,
cipCardOffloadConfigHostName DisplayString(SIZE(1..10)),
cipCardOffloadConfigRouterName DisplayString(SIZE(1..10)),
cipCardOffloadConfigLinkHostAppl DisplayString(SIZE(1..10)),
cipCardOffloadConfigLinkRouterAppl DisplayString(SIZE(1..10)),
cipCardOffloadConfigAPIHostAppl DisplayString(SIZE(1..10)),
cipCardOffloadConfigAPIRouterAppl DisplayString(SIZE(1..10)),
cipCardOffloadConfigBroadcastEnable TruthValue,
cipCardOffloadConfigRowStatus RowStatus}cipCardOffloadConfigPath
OBJECT-TYPESYNTAXOCTETSTRING(SIZE(2))MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Hex path identifier for the escon director switch port
containing the fiber from the channel on the host to
which this CMCC CLAW task connects.
This is a concatenation of the switch port number, the
channel logical address (used by the host to associate
an logical partition (LPAR) with the control unit), and
the control unit logical address (address of a logical
control unit used by the host to associate a group of
physical devices).
For a directly connected channel, the switch port number
is usually 01."::={cipCardOffloadConfigEntry 1}cipCardOffloadConfigDevice
OBJECT-TYPESYNTAXOCTETSTRING(SIZE(2))MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Two digit hex device address for the device the SNA host will
use to communicate with the offload task on the CMCC. The address
must be even."::={cipCardOffloadConfigEntry 2}cipCardOffloadConfigIpAddr
OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-createSTATUScurrentDESCRIPTION"IP address of the host application for the offload task as
specified in the HOME statement of the PROFILE TCPIP."::={cipCardOffloadConfigEntry 3}cipCardOffloadConfigHostName
OBJECT-TYPESYNTAXDisplayString(SIZE(1..10))MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Host name parameter as specified in the DEVICE statement
of the PROFILE TCPIP."::={cipCardOffloadConfigEntry 4}cipCardOffloadConfigRouterName
OBJECT-TYPESYNTAXDisplayString(SIZE(1..10))MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Workstation name parameter as specified in the DEVICE
statement of the mainframe PROFILE TCPIP."::={cipCardOffloadConfigEntry 5}cipCardOffloadConfigLinkHostAppl
OBJECT-TYPESYNTAXDisplayString(SIZE(1..10))MAX-ACCESSread-create
STATUScurrentDESCRIPTION"Name of the application providing the IP link services,
as specified in the mainframe configuration."::={cipCardOffloadConfigEntry 6}cipCardOffloadConfigLinkRouterAppl
OBJECT-TYPESYNTAXDisplayString(SIZE(1..10))MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Name of the router application providing the IP link
services, as specified in the mainframe configuration."::={cipCardOffloadConfigEntry 7}cipCardOffloadConfigAPIHostAppl
OBJECT-TYPESYNTAXDisplayString(SIZE(1..10))MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Name of the mainframe application providing the API
services, as specified in the mainframe configuration."::={cipCardOffloadConfigEntry 8}cipCardOffloadConfigAPIRouterAppl
OBJECT-TYPESYNTAXDisplayString(SIZE(1..10))MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Name of the router application providing the API services,
as specified in the mainframe configuration."
::={cipCardOffloadConfigEntry 9}cipCardOffloadConfigBroadcastEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-createSTATUScurrentDESCRIPTION"Control processing of broadcast frames for the
path/device this instance of OFFLOAD is configured
on. Enable turns broadcast processing on."::={cipCardOffloadConfigEntry 10}cipCardOffloadConfigRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used by a management station to
create or delete the row entry in
cipCardOffloadConfigTable following the RowStatus
textual convention."::={cipCardOffloadConfigEntry 11}-- ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;--
-- Conformance Information
--ciscoTcpOffloadMibConformance OBJECTIDENTIFIER::={ ciscoTcpOffloadMIB 2}ciscoTcpOffloadMibCompliances OBJECTIDENTIFIER::={ ciscoTcpOffloadMibConformance 1}ciscoTcpOffloadMibGroups OBJECTIDENTIFIER::={ ciscoTcpOffloadMibConformance 2}--
-- Compliance Statements
--ciscoTcpOffloadMibCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for the TcpIP Offload feature."MODULE
MANDATORY-GROUPS{
ciscoTcpOffloadGroup
}::={ ciscoTcpOffloadMibCompliances 1}ciscoTcpOffloadGroup OBJECT-GROUPOBJECTS{-- Table Header-- cipCardOffloadConfigTable-- cipCardOffloadConfigEntry-- Table Indicies-- cipCardEntryIndex-- cipCardDtrBrdIndex-- cipCardSubChannelIndex--
cipCardOffloadConfigPath,
cipCardOffloadConfigDevice,
cipCardOffloadConfigIpAddr,
cipCardOffloadConfigHostName,
cipCardOffloadConfigRouterName,
cipCardOffloadConfigLinkHostAppl,
cipCardOffloadConfigLinkRouterAppl,
cipCardOffloadConfigAPIHostAppl,
cipCardOffloadConfigAPIRouterAppl,
cipCardOffloadConfigBroadcastEnable,
cipCardOffloadConfigRowStatus
}STATUScurrentDESCRIPTION"A collection of objects providing configuration capability."::={ ciscoTcpOffloadMibGroups 1}END